Hull
Both hulls have bulkheads, twice lengthwise. Standing height in hulls, salon, galley and head. Material used: polyester, epoxy and marine plywood. Both hulls and the bridge deck where built from one piece of LMI laminate (full-laminate)
The laminate is approx 10mm thick above the water line and reaches approx. 20mm below the water line around the keel area. The beams are laminated into the hull, and, spaced in 50 cm, reaches all the way from the hulls to the bridge deck. The dock house made from plywood/polyester in sandwich method.
Both swimming platforms added in 1999 and are made from epoxy. Other additions built in 1999:
- Two keels, measurements ca 2.5x0.4m and are made from hard foam and four layers of Byax glass fibre / polyester. The laminate has a thickness of approx. 8-10 mm.
- The hull extensions in the bow are built from marine plywood, polyester and epoxy. As a base for those extensions served a very strong beam/stringer construction. The exterior coating consists of 4 layers of Byax, and the thickness of the laminate is approx. 8-10 mm.
